Table of Contents
Advertisement
Status
Common Service
Port
Modify
If your computer or server has more than one type of available service, please
select another service, and enter the same IP Address for that computer or
server.
To modify or delete an existing entry:
1.
Click the Modify in the entry you want to modify. If you want to delete the entry, click the Delete.
2.
Modify the information.
3.
Click the Save button.
Click the Enable/Disabled All button to make all entries enabled/disabled.
Click the Delete All button to delete all entries.
Click the Next button to go to the next page and click the Previous button to return the previous page.
5.8.2 Port Triggering
Choose menu "Forwarding > Port Triggering", and then you can view and add port triggering in the screen as
shown in Figure 5-8-2-1.
Some applications require multiple connections, like Internet games, video conferencing, Internet calling and so
on. These applications cannot work with a pure NAT Router. Port Triggering is used for some of these
applications that can work with an NAT Router.
Once configured, operation is as follows:
1.
A local host makes an outgoing connection to an external host using a destination port number defined in
the Trigger Port field.
2.
The Router records this connection, opens the incoming port or ports associated with this entry in the Port
Triggering table, and associates them with the local host.
3.
When necessary the external host will be able to connect to the local host using one of the ports defined in
the Incoming Ports field.
protocols are supported by the Device.).
The status of this entry. "Enabled" means the virtual server entry is
enabled.
Some common services already exist in the pull-down list.
To modify or delete an existing entry.
User Manual of WNAP-7206
-105-
Advertisement
Table of Contents
