Dhcp Clients List - Planet Networking & Communication WNAP-7206 User Manual

 Default Gateway
 Default Domain
 Primary DNS
 Secondary DNS
To use the DHCP server function of the device, you should configure all
computers in the LAN as "Obtain an IP Address automatically" mode. This
function will take effect until the device reboots.

5.7.2 DHCP Clients List

Choose menu "DHCP > DHCP Clients List", and then you can view the information about the clients attached to
the Device in the screen as shown in
The page includes the following fields:
Object
 Client Name
 MAC Address
 Assigned IP
 Lease Time
connecting to the device with the current DHCP Address. Enter
the amount of time (in minutes), and then the DHCP address
will be "leased". The time range is 1~2880 minutes. The default
value is 120 minutes.
(Optional) Input the IP Address of the gateway.
(Optional) Input the domain name of your network.
(Optional) Input the DNS IP address provided by your ISP or
consult your ISP.
(Optional) You can input the IP Address of another DNS server
if your ISP provides two DNS servers.
Figure 5-7-2.
Figure 5-7-2 DHCP Client List
Description
The name of the DHCP client.
The MAC address of the DHCP client.
The IP address that the device has allocated to the DHCP
client.
The time of the DHCP client leased.
-101-
User Manual of WNAP-7206