Multi-Ssid Mode - Planet Networking & Communication WNAP-7206 User Manual

 Transmit Power
 Channel
 Mode
 Max Tx Rate
 Enable Wireless Radio
 Enable SSID Broadcast
 Enable DFS
 Save
5.6.1.2.

Multi-SSID Mode

You can limit the Transmit Power of the Device through this field. You
can select one of the options listed as the below items.
This field determines which operating frequency will be used. It is not
necessary to change the wireless channel unless you notice
interference problems with another nearby access point. If you select
auto, then the Device will select the best channel automatically.
This field determines the wireless mode which the Device works on.
You can limit the maximum tx rate of the Device through this field. You
can select one of the options listed as the below items.
The wireless radio of the Device can be enabled or disabled to allow
wireless stations access. If enabled, the wireless stations will be able
to access the Device; otherwise, wireless stations will not be able to
access the Device.
If you select the Enable SSID Broadcast checkbox, the wireless
Router will broadcast its name (SSID) on the air.
Check Enable DFS to enable DFS function.
Click the Save button to save your settings on this page.
User Manual of WNAP-7206
-55-