System Types; System Models; Keypads; Lcd Icon And Led Keypad Symbols - DSC HS2016 User Manual

3 S y s t e m T y p e s

3.1 System Models

HS2016 16 Zone Alarm System
HS2016-4 16 Zone Alarm System
HS2032 32 Zone Alarm System
HS2064 64 Zone Alarm System
HS2128 128 Zone Alarm System

3.2 Keypads

The HS Series Alarm System supports a variety wireless, hardwired and proximity sensor LCD, LED and
Icon keypads.

3.2.1 LCD Icon and LED Keypad Symbols

1
5
9
12 7
1 Clock Digits 1, 2
2 : (Colon)
3 Clock Digits 3, 4
4 1 to 8
5 Memory
6 Bypass
7 Program
8 Away
9 Fire
10 Stay
11 Chime
12 OPEN
13 AC
14 System Trouble
15 Night
16 Ready Light (green)
17 Armed Light (red)
HS2ICN Series
4
2 3
6
11 8
These two 7 segment clock digits indicate the hour digits when the local clock is
active, and identify the zone when the OPEN or ALARM icons are active. These two
digits scroll one zone per second from the lowest zone number to the highest when
scrolling through zones.
This icon is the hours/minutes divider and will flash once a second when the local
clock is active.
These two 7 segment displays are the minute digits when the local clock is active.
These numbers identify troubles when
Indicates that there are alarms in memory.
Indicates that there are zones automatically or manually bypassed.
Indicates that the system is in Installer's Programming, or the keypad is busy.
Indicates that the panel is armed in the Away Mode.
Indicates that there are fire alarms in memory.
Indicates that the panel is armed in the Stay Mode.
This icon turns on when the Chime function key is pressed to enable Door Chime on
the system. It will turn off when the chime function key is pressed again to disable
Door Chime.
This icon is used with clock digits 1 and 2 to indicate violated zones (not alarm) on
the system. When zones are opened, the OPEN icon will turn on, and 7 segment dis-
plays 1 and 2 will scroll through the violated zones.
Indicates that AC is present at the main panel.
Indicates that a system trouble is active.
Indicates that the panel is armed in the Night Mode.
If the Ready light is on, the system is ready for arming.
If the Armed light is on, the system has been armed successfully.
7
15
10
6
[ ][2]
Q
is pressed.
8
HS2LED Series
5
9
16
17
14
13