DSC HS2016 User Manual page 21

6 W i r e l e s s K e y s a n d o t h e r D e v i c e s
Table 6-1 SMS Commands (Continued)
Commands
Activate Command Output 2
Activate Command Output 3
Activate Command Output 4
Deactivate Command Output 1
Deactivate Command Output 2
Deactivate Command Output 3
Deactivate Command Output 4
Bypass 001
Unbypass 001
Status Request
Alarm Memory Request
Help
6.3.3 SMS Responses from your System
SMS responses are sent to the phone that initiated the command.
Table 6-2 System SMS Responses
System Response
Successful
Unsuccessful
Invalid Command
System Stay Armed
System Away Armed
System Night Armed
System Disarmed Ready
System Disarmed Not Ready
System is in Alarm
Service is Required
No Alarm Memory
Notes
Activates Output 2.
Activates Output 3.
Activates Output 4.
Deactivates Output 1.
Deactivates Output 2.
Deactivates Output 3.
Deactivates Output 4.
Bypasses specified zone number.
Clears the bypass from the specified zone number.
Omitting the partition number causes the system to send a status report
for all partitions. To request a status report for a specific partition enter
the appropriate partition number.
Omitting the partition number causes the system to send a status report
for all partitions. To request a status report for a specific partition enter
the appropriate partition number.
The Help command generates an SMS response listing all Interactive
commands that can be sent to the module. Access Code is not required.
Notes
Sent when a command and control function is successfully performed by
the panel
Sent when a command and control function not successfully
performed by the panel
Sent when a command sent was not accepted as valid by the system.
Sent in response to a status request and if a partition is stay armed
Sent in response to a status request and if a partition is away armed
Sent in response to a status request and if a partition is night armed
Sent in response to a status request and if a partition is disarmed and
ready to arm.
Sent in response to a status request and if a partition is disarmed and is
not ready to arm.
Sent in response to a status request and if a partition is in alarm.
Sent in response to a status request and if a partition is in trouble.
Sent in response to a alarm memory request and there are no alarms in
memory.
21