SERVICE CHECK PROGRAM
1. Test Program
This test program is used for "service test" of the n8 or n12. The panel controls (keys, encoders, and LED indicators) tests cannot be
automatically judged and they should be determined by visual inspection.
1-1. Preparations
Personal computer: (OS: Windows XP) S400 compatible, 2 pcs. of IEEE1394 repeater hubs [ex.: 1394-RP2GPH by Sanwa Supply],
2 pcs. of IEEE1394 cables, UX16 (USB-MIDI interface), foot switch (FC-5 or equivalent)
1-2. Wiring diagram for service test
<n8>
* Connect the MIDI IN connector of the UX16 to the MIDI OUT connector of the n8 or n12 and
connect the MIDI OUT connector of the UX16 to the MIDI IN connector of the n8 or n12.
Personal computer
UX16*
MIDI IN
<n12>
• DAW I/O connector connection checking
IEEE1394 repeater hub
IEEE1394 cable
IEEE1394 repeater hub
MIDI OUT
Connect the foot switch
when checking SWITCH
n8/n12
65