Advertisement
Executive Mode
Executive mode, when enabled, provides security from an accidental or unauthorized front panel button press by locking out the
input switching buttons.
The RS-232 and USB ports are always accessible regardless of the executive mode state.
To enable or disable executive mode:
•
Press and hold input 1 and input 2 for 3 seconds to toggle executive mode on or off.
•
The front panel LEDs flash twice to indicate that executive mode is enabled or disabled.
All LEDs flash twice if a button is pressed while executive mode is enabled.
Figure 3.
MPS 601 Application Diagram
For information on safety guidelines, regulatory compliances, EMI/EMF compatibility, accessibility, and related topics, see the
Extron Safety and Regulatory Compliance Guide
© 2014-2018 Extron Electronics — All rights reserved.
All trademarks mentioned are the property of their respective owners.
4
on the Extron website.
www.extron.com
68-2454-50 Rev. B
10 18
Advertisement
