Table of Contents
Advertisement
10. OUTPUT Section
The output section represents the internal routing matrix and state of the outputs. Routing is performed
by selecting an output and assigning any input to it. When a routing is active, its input is automatically
monitored for lock and sync in the input section. For AVB stream outputs, their states are additionally
monitored in the output section.
Example:
In the OUTPUT section, MADI Optical 1-12 is chosen as source for AVB Stream 2. The M-32 DA Pro is
clock master, but the incoming MADI signal is not correctly synchronized. This causes a warning in the
INPUT section. If MADI Optical is not routed to any output, an invalid or missing signal does not cause a
warning.
Use the web remote to find out quickly which outputs are receiving a specific input
signal. The web remote provides a thorough representation of all active routing
connections at a glance.
Device Output Section
The device allows full inspection and configuration of outgoing signals including routing in four channel
blocks.
Web Remote Output Section
The web remote integrates the output ports with a routing interface.
Block of four channels
1
Active block
2
Delete Routing
3
Port Settings
4
Port Label
5
Indicator
6
RME M-32 DA Pro User's Guide
10. OUTPUT Section | 38
Advertisement
Table of Contents
