Timer; Daily/Weekly Timer - Flexit K2.1 User Manual

In the HEATING ELEMENT OFF/ON menu item, the
additional heating in the ventilation unit can be switched
used as a source of heat.
If necessary, the ventilation unit's heating can also be
is used as a source of heat. It is best to leave it ON, as
the unit will then respond automatically when there is a
need for additional heating.
NB! This is not possible if the unit is installed with a
water battery.
is displayed when the display enters idle mode.
HEATING ELEMENT ON/OFF
HEATING ELEMENT

7.5. TIMER

Here you set the time you want for the MAX TIMER
function. This is used when the function is activated from
the main menu.
TIMER
60 min
8.4 under "Timer".
K 2 . 1
ON OK?
OK?

7.6. DAILY/WEEKLY TIMER

The programming of the timer begins by selecting the day.
DAY / WEEK SETTINGS
MONDAY
TUESDAY
WEDNESDAY
THURSDAY
FRIDAY
SATURDAY
SUNDAY
A new menu screen appears under each day.
TUESDAY
1 08 : 00 16 : 00
-
2 16 : 00 18 : 00
-
3 18 : 00 19 : 00
-
4 19 : 00 24 : 00
-
intervals. Adjust the start and stop times for each interval
and then adjust the desired speed and temperature.
To activate the interval, select a green tick. A red cross
means that the interval is not activated. If necessary,
then select another interval and repeat the procedure.
NOTICE! The following rules apply
to the programming:
!
• A time interval with a higher
number can never be started
before a previous one has been
finished.
• The stop time can never appear
before the start time.
procedure for other days.
When the timer is active, this symbol is displayed
when the display enters idle mode.
If there is no new time interval registered after the
the setting that was previously active.
17
OK?
16°
MIN
18°
NORMAL
16°
MAX
18°
NORMAL