Set Mode; I Set Mode Programming - Icom IC-M302 Instruction Manual

6

SET MODE

I Set mode programming

Set mode is used to change the conditions of the trans-
ceiver's functions: scan type (normal or priority), scan resume
timer, weather alert, dual/tri-watch, DSC watch, transceiver's
beep tone and Auto ACK.
Available functions may differ depending on dealer setting.
D SET mode operation
q Turn power OFF.
w While pushing [16•
• " " appears on channel name indicator.
e After the display appears, release [16•
r Push [16•
] to select the desired item, if necessary.
9
t Push [Y]/[Z] to select the desired condition of the item.
y Turn power OFF, then ON again to exit set mode.
12
], turn power ON to enter SET mode.
9
].
9
D SET MODE CONSTRUCTION
Scan mode
Starting item
Push
Auto acknowledgement
Beep tone
Scan resume timer
Weather alert
Dual/tri watch
DSC watch