Specifications And Options - Icom IC-M302 Instruction Manual

I Specifications
ï ï General
• Frequency coverage :
Transmit 156.025–157.425 MHz
Receive 156.050–163.275 MHz
• Mode : FM (16K0G3E)
DSC(16K0G2B)
• Channel spacing : 25 kHz
• Current drain (at 13.8 V) : TX high
Max. audio
• Power supply requirement : 13.8 V DC
• Frequency stability : ±10 ppm (–20°C to +60°C;–4°F to +140°F)
• Dimensions : 153(W)
(Projection not included) 6
• Weight : 825 g ; 1.8 lb
ï ï Transmitter
• Output power : 25 W and 1 W
• Modulation system : Variable reactance frequency modulation
• Max. frequency deviation : ±5.0 kHz
• Spurious emissions : Less than –70 dB
ï ï Receiver
• Receive system : Double conversion superheterodyne
• Sensitivity (12 dB SINAD) : Less than 0.22µV (typical)
• Squelch sensitivity : Less than 0.22µV (typical)
• Intermodulation rejection ratio : More than 70 dB
• Spurious response rejection ratio : More than 70 dB
• Adjacent channel selectivity : More than 70 dB
• Audio output power : More than 4.5W at 10% distortion with a 4
Ω load
All stated specifications are subject to change without notice or
obligation.

SPECIFICATIONS AND OPTIONS

5.5 A max.
1.5 A max.
× 67(H) × 141.6(D) mm
(W) × 2
1 5 9
/ / (H)× 5 / (D) in
32 8 16
I Options
• MB-69 FLUSH MOUNT
For mounting the transceiver to a panel.
• MB-92 DUST COVER
For mounting the transceiver to a front panel to avoid expo-
sure the keys and knobs to water when the transceiver is not
used.
9
8
9
17