Digisol RANGER SERIES Quick Installation Manual page 6

On top view of router,
There is four 5bBi dipole, non detachable antennas on each corner of
router. WPS, RST button and LED to describe connection status of router.
WPS: Press this button for 3 seconds to initiate WPS.
RST(RESET): Reset the router to factory default settings (clear all settings).
Press this button and hold for 3 seconds to restore all settings to factory
default.
LED LED Status
On
Power
(PWR)
Off
On
WAN
Blinking
Off
On
LAN (1-4) Blinking
Off
On
WLAN
Off
Blinking
On
USB
Off
On
WPS Off
Blinking
Indication
Router is switched on and correctly powered
Router is switched off.
WAN port is active
WAN connected (transferring or receiving data).
WAN disconnected.
LAN port is active
LAN connected (transferring or receiving data).
LAN disconnected.
Wireless network is switched on.
Wireless network is switched off.
Wireless connected (transferring or receiving data).
USB connected
USB not connected
WPS is active
WPS is not active
Searching for WPS active device.