Basic Operation - Icom IC-A25N Basic Manual

3

BASIC OPERATION

■ Receiving and transmitting
D Setting the frequency
Setting the frequency in the VFO mode
1. Push [F], and then rotate dial to set the MHz digit.
2. Rotate dial to set the kHz digit.
L  I fthetransceiverisintheMemorymode,Push[F],andthen
[MR/MW]toentertheVFOmode.
Setting the frequency in the Memory mode
1. Push [MR/MW] to enter the Memory mode.
• The selected group and channel is displayed.
Example:
2. Rotate dial to select the channel.
L Push [F], and then push [0/GROUP]
toenterthe"GroupList"screen,to
select the group.
D Receiving
Whenreceivingasignal,"RX"isdisplayedandaudiois
heard.
L Rotate volume control knob to adjust
the audio output level.
D Adjusting the squelch
z  P ush[SQL∫]or[SQL√] to adjust
thesquelchifnecessary
• The adjustment screen is displayed
while adjusting.
D Using the Automatic Noise Limiter function
Thefunctionreducesnoisecomponentswhilereceiving,
such as those caused by the engine ignition systems.
z PushtoturnthefunctionONorOFF.
•  " ANL"isdisplayed
D Transmitting
1. Hold down [PTT], and then speak
at your normal voice level.
• "TX"isdisplayed