Table of Contents
Advertisement
Checkweigh lower limit
Checkweigh upper limit
A blank line printed
Any of these can be printed on any of the 15 lines available. Not all items need to be used
and any one can be used more than once (see section 13.3).
The data for each form will be preceded by a start-of-header <SOH> character (01) and
terminated with an end-of-transmission <EOT> character (04). These characters will be
ignored by a serial printer but will allow a computer program which reads the data to
distinguish between this block report format and the single-line output format described
above.
11.2 STANDARD FORMAT
The balance will print the following data as the standard form. The standard form cannot
be changed. The format of the custom forms #1 and #2 will be the same as the standard
form until modified by the user.
This will result in a printout that looks like:
*NOTE: The format of the results line will change depending on the mode in which the
balance is operating, e.g.
Normal weighing, Check weighing, Animal weighing: "123.456 g"
Parts counting: "1234 pcs"
Percent weighing: "12.345 %"
11.3 INPUT COMMANDS USING REMOTE KEYS
The balance can be controlled with the following commands sent using remote keys such
as from a PC. The commands must be sent in upper case letters, i.e. "KT" not "kt". Press
Find Quality Products Online at:
© 2014
Low: xxx.xxx g
High: xxx.xxx g
<CR><LF> only.
Line 1
Date
Line 2
Time
Line 3
Blank line
Line 4
ID number
Line 5
Blank line
Line 6
Result
Line 7
Blank line
Line 8
Blank line
Date:
23/09/04
Time:
15:45:27
ID No: 123456
Net: 123.456 g
GlobalTestSupply
www.
29
.com
sales@GlobalTestSupply.com
Advertisement
Table of Contents
