Dynamic (Animal) Weighing - Symmetry 124 User Manual

Precision balance series analytical & toploader models

Hide thumbs

Table Of Contents

Table of Contents

10.4.3

The balance can be set to weigh animals or moving items, also known as dynamic

weighing. The balance will collect the weight over a period of time to arrive at an average

value and display the value until the operator resets the balance. The actual weighing

process can begin either automatically when the weight is placed on the pan or when

initiated by the operator. The weighing unit can be selected as normal using the [Unit] and

[Setup] keys, before entering the dynamic weighing process.

Steps:

Press [Mode] and then the [Up] or [Down] key to select Dynamic (Animal Weighing).

Dynamic

When "

Press [Up] or [Down] to select "rUN" for starting the dynamic weighing using the method

previously set, or "SEtuP" to set up the balance for animal weighing (see the section on

Dynamic Weighing Setup Parameters)

10.4.3.1

When the balance is in the MANUAL mode –

If [Setup] is pressed when "rUN" is selected, balance will display "StArt "

Place the item on the pan and press [Setup] again

After the configured Delay and test time are computed by the balance, the result will be

displayed by showing "

section Dynamic Weighing Setup Parameters)

10.4.3.2

When the balance is in the AUTO mode –

If [Setup] is pressed when "rUN" is selected, balance will display "LOAd"

Place the item on the pan. The animal weighing test will begin automatically

After the configured delay and test time are computed by the balance, the result will be

shown displaying "HOLD" (see the section on Dynamic Weighing Setup Parameters)

During animal weighing, if the [Print] key is pressed, the balance will display "PAUSEd"

for 1 second then show the current average weight with the "

To resume, press [Print] again or

Pressing [Mode] will display "StOP" for one second then show the final value. The value

will be locked until the user releases it.

Find Quality Products Online at: