Weighing - Symmetry 124 User Manual

10.3 WEIGHING

Press [0/T] to zero the balance if required, "0 " will be displayed
Place a mass on the pan and the weight will be displayed
If a container is used, press [0/T] to tare the balance when the balance symbol "~" is
on. "Net" will be displayed to indicate that the balance is tared.
When the display shows zero, place the item to be weighed. Only the net weight will be
displayed.
At any time the [Unit] key may be pressed to select another unit. Use the [Up] or [Down]
keys to scroll through the units and select the desired unit by pressing [Setup], the display
will change to show the weight in the selected weighing unit. The available weighing units
can be enabled or disabled by the user (see section 13.1). Only weighing units that have
been enabled will be cycled through when [Unit] is pressed.
Weighing Units:
Note: Approved units have restricted range of units available.
You can select alternative weighing units to display the weight by pressing the [Unit] key.
The available weighing units are:
Unit
1 GRAMS
2 MILLIGRAMS
3 KILOGRAMS
4 CARATS
5 PENNYWEIGHT dwt
6 GRAINS
7 TROY OUNCES
8 OUNCES
9 POUNDS
11 CUSTOM
It is possible to set the balance to display only grams. Grams will always be one of the
units enabled, by default.
If "Custom" unit is selected, the balance will prompt for entering a multiplier by displaying
"CF 1.2345", where "1.2345" is the last stored value. Any value ranging from 0.100 to
10.000 may be entered, by which the weight in grams will be multiplied before being
displayed. If a multiplier of greater than 1.000 is entered, the number of decimal places
displayed will be reduced by one. This multiplier value will be saved for the next use until it
is changed by the user.
The balance displays the alternate weighing units with as much precision as possible. For
example, the 410g capacity balance (410g x 0.001g) could weigh up to:
Find Quality Products Online at:
© 2014
Symbol Models
g All
mg not 0.01g units
kg 0.01g & 0.1g
units
ct All
All
GN All
ozt All
oz All
Lb 0.01g & 0.1g
units
Custom All
GlobalTestSupply
www.
20
Conversion Conversion
Factor Factor
1g = 1 unit = grams
1 1.0
1000 0.001
0.001 1000
5 0.2000
0.643014865 1.555174
15.43236 0.0647989
0.032150747 31.103476
0.035273962 28.349523
0.00220462 453.59237
As specified As specified
.com
sales@GlobalTestSupply.com