Symmetry 124 User Manual page 27

Remove the item from the pan.
Press [Mode] to go back to "rUN" to weigh another item or [0/T] to return to normal
weighing.
10.4.3.3
Press [Mode] and then [Up] or [Down] to select Animal Weighing. When "
displayed press [Setup] to enter the function
Press the [Up] or [Down] key to select "SEtuP"
Press [Setup] to select "SEtuP" to set up the balance for animal weighing
Use the [Up] or [Down] key to scroll through the options for setting up the mode. The
display will show "AUtO" or "mAnUAL".
Select "mAnUAL" or "AUtO"
If "AUtO" is selected-
ThresHOLD (For AUTO mode only)
The display will next show "TH
by the balance to start the process for animal weighing. The value will be shown in the last
selected unit.
The value XX can be changed from 1 to 99 grams using the keypad numeric entry method.
To confirm the desired value, press [Setup]
10.4.3.4
After [Setup] is pressed to select "mAnUAL" or "AUtO", it will display "tImE XX", where
XX is the number of seconds over which the balance will average to compute the final
weight as set during last operation
The value XX can be changed to between 10-99 seconds using the keypad numeric entry
method.
To confirm the desired value, press [Setup]
Delay
Next, the display will show "dLY XX" where XX is the time in seconds taken by the balance
before the sampling starts.
Find Quality Products Online at:
© 2014
Animal Weighing Setup Parameters
XX" where XX is the minimum weight of the item required
Test time
GlobalTestSupply
www. .com
25
Dynamic
" is
sales@GlobalTestSupply.com