Takeuchi TB285 Operator's Manual page 98

CONTROLS
acceSSorieS
Auxiliary 2/4 select button
This button is used to change from the
second auxiliary operation to the fourth
auxiliary operation.
Pressing this button displays the second
auxiliary on the LCD to indicate that the
second auxiliary operation is enabled.
Pressing this button again displays the
auxiliary 4th on the LCD to indicate that the
auxiliary 4th operation is enabled.
The actual operation is performed with the
auxiliary 2nd/4th switch (slider switch).
Refer to "Auxiliary 2nd/4th switch" on page
2-26.
2-50