Takeuchi TB285 Operator's Manual page 69

CONTROLS
inStrument cluSter
e. Press and hold the auxiliary flow rate
select switch for approximately three
seconds to end flow rate changing
operation.
4. Auxiliary 1st-3 setting information
Refer to "Auxiliary 1st-2 setting
information" above.
5. Auxiliary 2nd setting information
Refer to "Auxiliary 1st-2 setting
information" above.
6. Auxiliary 4th setting information
Refer to "Auxiliary 1st-2 setting
information" above.
This information is displayed if the auxiliary
4th is equipped.
7. Engine model
8. Engine serial number
9. Returns to the vehicle error code page.
2-21