TROUBLESHOOTING
if a warning lamp flaSheS
Warning lamp
Lamp name
Air cleaner
warning lamp
Water
separator
warning lamp
Third auxiliary
hydraulic
warning lamp
Overload
warning lamp
Causes and remedies
The air cleaner is clogged. Clean it.
Refer to "Cleaning the air cleaner" on page 5-38.
Water is in the water separator. Drain water.
Refer to "Draining the water from the water separator" on
page 5-63.
Pressure in the third auxiliary hydraulic line is too low
Consult your sales or service dealer for help.
This lamp starts flashing if the overload warning device is
activated. If it occurs, reduce the load to be lifted.
Refer to "Overload warning device" on page 2-53.
6-11