Takeuchi TB285 Operator's Manual page 92

CONTROLS
acceSSorieS
Presetting stations
1. Select the band (FM or AM) and the
station you want to preset.
2. To set the selected station to a preset
button, choose the button to be set and
then press and hold the button for three
seconds or more. The number of the
preset button chosen appears on the
LCD.
3. For more stations, repeat the steps (1) and
(2) above.
• If the preset button on which a station
has been set to is pressed and held for
two seconds or more, the preset
information will be modified.
• If the stored information is erased during
battery replacement on the vehicle, set
the stations again to the preset buttons.
• Each preset button can store information
on one FM station and one AM station.
AUTO storing
Press the AST button for two seconds or
more while playing the radio. The radio starts
seeking the audible stations obtained into
memory, and assign each preset button (1 to
6) a station.
Note: The previous station setting stored in
memory will be overwritten. If the
arrangement of the preset buttons to the
corresponding stations is not desirable, try
the "Presetting stations" described above.
AUX audio connection
• Connect a portable audio player and listen
to your favorite music.
• Plug a patch cord (without resistor) into the
headphone jack of the audio player.
• Plug a stereo mini plug (3.5 mm) into the
AUX-IN jack on the radio.
• To listen to the audio player, press the AUX
button. (The AUX display appears and the
frequency display is changed to the clock
display.)
• To return to the radio, press the AUX
button again.
• When connecting, adjust the sound volume
level of the audio player so that it is same
as that of the radio.
• Adjust the sound volume of the audio
player by using the volume control buttons
on the radio.
• Do not connect a device with a larger
output compared with a portable audio
player.
Setting the clock time
• Be sure that the time is displayed on the
LCD. If not, press the AUX button to
display the time.
• Use the tune
Use the tune
• To set the minute digits to "00" when they
are from "55" to "59" or from "01" to "05",
press the ZERO button.
2-44
button to set the minute.
button to set the hour.