Label Of The End Product - Quectel Smart Wi-Fi Module Series User Manual

the following two conditions: (1) this device may not cause harmful interference and (2) this device
must accept any interference received, including interference that may cause undesired operation.
9.7.

LABEL OF THE END PRODUCT:

The final end product must be labeled in a visible area with the following " Contains Transmitter
Module FCC ID: XMR201709SC20W". If the size of the end product is larger than 8x10cm, then the
following FCC part 15.19 statement has to also be available on the label: This device complies with
Part 15 of FCC rules.
Operation is subject to the following two conditions: (1) this device may not cause harmful
interference and (2) this device must accept any interference received, including interference that
may cause undesired operation.
The Innovation, Science and Economic Development Canada certification label of a module shall be
clearly visible at all times when installed in the host device; otherwise, the host device must be
labeled to display the Innovation, Science and Economic Development Canada certification number
for the module, preceded by the words "Contains transmitter module IC: 10224A-201709SC20W".
The device is going on be operated in 5150~5250 frequency range. It is restricted indoor
environment only in Canada.
SC20-W_Manual_R1.0 Confidential / Released 41 / 41