Information about the documentation About this documentation • Read this documentation before initial operation or use. This is a prerequisite for safe, trouble-free handling and use of the product. • Observe the safety instructions and warnings in this documentation and on the product. •...
Page 4
• Make a note of the designation and serial number printed on the identification plate in the following table. ▶ Always quote this information when you contact a Hilti representative or Hilti Service to inquire about the product. Product information...
Page 5
Personal safety ▶ Stay alert, watch what you are doing and use common sense when operating a power tool. Do not use a power tool while you are tired or under the influence of drugs, alcohol or medication. A moment of inattention while operating power tools may result in serious personal injury. ▶...
Page 6
▶ Wear suitable protective glasses, a hard hat, ear protection, protective gloves and light respiratory protection while using the tool. ▶ Always activate the safety lock before changing accessory tools, before storing the electric tool or before transporting it. ▶ Wear protective gloves also when changing the accessory tool. Touching the accessory tool presents a risk of injury (cuts or burns).
Working with materials hazardous to health (e.g. asbestos) is not permissible. Items supplied Drywall screwdriver, operating instructions You can find other system products approved for use with your product at your local Hilti Center or online at: www.hilti.com. Technical data...
SD 6000 Sound (power) level (L 98 dB(A) Uncertainty for the sound power level (K 3 dB(A) Emission sound pressure level (L 85 dB(A) Uncertainty for the sound pressure level (K 3 dB(A) Total vibration SD 2500 SD 5000 SD 6000 Vibration emission value 2.5 m/s²...
Page 12
Changing the accessory tool. 1. Pull the depth gauge away from the power tool, releasing the snap-on connection. 2. Push the chuck towards the screwdriver, turning the chuck slightly at the same time, and then hold it in this position. 3.
Check all visible parts and controls for signs of damage at regular intervals and make sure that they all function correctly. • Do not operate the tool if signs of damage are found or if parts malfunction. Have the tool repaired by Hilti Service immediately. English Printed: 22.10.2018 | Doc-Nr: PUB / 5135921 / 000 / 02...
Click on the link to go to the table of hazardous substances: qr.hilti.com/r5390 for the SD 5000. Click on the link to go to the table of hazardous substances: qr.hilti.com/r5241 for the SD 6000. There is a link to the RoHS table, in the form of a QR code, at the end of this document.