Information about the documentation About this documentation • Read this documentation before initial operation or use. This is a prerequisite for safe, trouble-free handling and use of the product. • Observe the safety instructions and warnings in this documentation and on the product. •...
Page 4
• Make a note of the designation and serial number printed on the identification plate in the following table. ▶ Always quote this information when you contact a Hilti representative or Hilti Service to inquire about the product. Product information...
Page 5
Personal safety ▶ Stay alert, watch what you are doing and use common sense when operating a power tool. Do not use a power tool while you are tired or under the influence of drugs, alcohol or medication. A moment of inattention while operating power tools may result in serious personal injury. ▶...
Page 6
▶ Wear suitable protective glasses, a hard hat, ear protection, protective gloves and light respiratory protection while using the tool. ▶ Always activate the safety lock before changing accessory tools, before storing the electric tool or before transporting it. ▶ Wear protective gloves also when changing the accessory tool. Touching the accessory tool presents a risk of injury (cuts or burns).
Page 7
Description Overview of the product English Printed: 22.10.2018 | Doc-Nr: PUB / 5135890 / 000 / 03...
Working with materials hazardous to health (e.g. asbestos) is not permissible. Items supplied Drywall screwdriver, operating instructions You can find other system products approved for use with your product at your local Hilti Center or online at: www.hilti.com. Technical data...
Page 9
▶ Set the forward / reverse selector switch to forward or reverse rotation. Changing the accessory tool. 1. Pull the depth gauge away from the power tool, releasing the snap-on connection. 2. Push the chuck towards the screwdriver, turning the chuck slightly at the same time, and then hold it in this position.
3. Insert the bit in the head of the screw and use the control switch to regulate the speed of the screwdriver. 4. Refit the depth gauge after removing the screws. 5.3.3 Switching on in sustained operating mode ▶ Switch on in sustained operating mode. 5.3.4 Switching off after sustained operation ▶...
Most of the materials from which Hilti tools and appliances are manufactured can be recycled. The materials must be correctly separated before they can be recycled. In many countries, your old tools, machines or appliances can be returned to Hilti for recycling. Ask Hilti Service or your Hilti representative for further information.