In these operating instructions, the designation “the tool” Always keep these operating instructions to- always refers to the SD 6000, SD 5000 or SD 2500 drywall gether with the power tool. screwdriver. Ensure that the operating instructions are...
2 Description 2.1 Use of the product as directed The SD 6000 is a hand-held, mains-powered electric tool for use in drywall installation. The SD 5000 is a hand-held, mains-powered electric tool for use in drywall installation. The SD 2500 is a hand-held, mains-powered electric tool for use in timber construction and drywall installation.
Page 7
Screw type Application SD 6000 SD 5000 SD 2500 / ∅ in mm Fastening metal framing to Special drywall metal framing (max. fasten- screw with able thickness 2.5 mm) drill point, type S‑DD 02 and S‑DD 03 Fastening drywall board to...
NOTE The power tool is available in various voltage ratings. Please refer to the type identification plate for details of the power tool’s voltage and power rating. Power tool SD 6000 SD 5000 SD 2500 Rated power input 710 W...
Page 9
Typical A-weighted sound power level, SD 2500 100 dB (A) Typical A-weighted sound power level, SD 5000 98 dB (A) Typical A-weighted sound power level, SD 6000 96 dB (A) Typical A-weighted emission sound pressure level, SD 89 dB (A)
Screwdriving without impact action, SD 6000, a 3 m/s² Uncertainty (K) 1.5 m/s² 5 Safety instructions moment of inattention while operating power tools 5.1 General Power Tool Safety Warnings may result in serious personal injury. b) Use personal protective equipment. Always wear WARNING eye protection.
Page 11
Hilti for wood dust and/or mineral dust together with this tool. Ensure that the workplace is well ventilated. The use of a dust mask of filter class P2 is recommended.
Turn the depth gauge to the right. 7.1.3.2 Changing the bit holder on the SD 5000 and 7.1.1.2 To drive the screw less deeply SD 6000 3 Turn the depth gauge to the left. NOTE The chuck features a standardized 1/4" hex. socket for 7.1.2 Removing the depth gauge 3...
Push the chuck toward the power tool, turn it slightly 7.2.1 Setting forward or reverse rotation 6 and hold it securely. The forward / reverse switch is used to select the direction Use the other hand to remove the bit holder. of rotation of the drive spindle.
10 Disposal Most of the materials from which Hilti power tools or appliances are manufactured can be recycled. The materials must be correctly separated before they can be recycled. In many countries, Hilti has already made arrangements for taking back your old power tools or appliances for recycling.
11 Manufacturer’s warranty - tools Hilti warrants that the tool supplied is free of defects in Additional claims are excluded, unless stringent na- material and workmanship. This warranty is valid so long tional rules prohibit such exclusion. In particular, Hilti...