Hilti SD 4500 Operating Instructions Manual
Drywall screwdrivers
Hide thumbs
Also See for SD 4500:
- Operating instructions manual (38 pages) ,
- Manual (39 pages) ,
- User manual (14 pages)
Related Manuals for Hilti SD 4500
Summary of Contents for Hilti SD 4500
- Page 1 SD 4500 / SD 2500 Operating instructions Mode d’emploi Manual de instrucciones Manual de instruções...
- Page 2 SMI 55 plus...
- Page 3 Click...
-
Page 5: Table Of Contents
The illustrations can be found on the fold-out cover pages. Keep these pages open while studying the oper- ating instructions. In these operating instructions, the SD 4500 and / or Contents Page SD 2500 screwdriver is referred to as « the power tool ». -
Page 6: Description
2. Description The SD 4500 and SD 2500 are designed to be used in 2.1 Use of the power tool as intended conjunction with a screw magazine (SMI 55 plus) and The SD 4500 is a hand-held, corded power tool for pro- tool extension (SME) if desired. -
Page 7: Tools And Accessories
3. Insert tools and accessories SD 4500 SD 2500 Belt hook Depth gauge S-DG-D 11 x 50 for 50 mm (2") bit holder S-DG-D 11 x 75 for 75 mm (3") bit holder Depth gauge Bit and bit holder S-BH 75 M and S-BH 50 M bit holders, PH2, SQ and... -
Page 8: Safety Rules
5. Safety rules with your finger on the switch or plugging in power 5.1 General safety rules tools that have the switch on invites accidents. -WARNING-! Read all instructions! Failure to follow d) Remove any adjusting key or wrench before turning all instructions listed below may result in electric shock, the power tool on. -
Page 9: Before Use
-WARNING- 5.2 Specific safety rules To reduce the risk of injury, user must read instruction a) Hold power tools by insulated gripping surfaces when manual. performing an operation where the cutting tool may contact hidden wiring or its own cord. Contact with a “live”... -
Page 10: Operation
7. Operation 7.5 Adjusting the depth gauge -NOTE- By adjusting the depth gauge, the screw can be driven flush with the surface or left projecting. Each click-stop -CAUTION- equals an adjustment of ± 0.25 mm (see illustration). Secure the workpiece. Use clamps or a vice to hold the workpiece securely in position. -
Page 11: Care And Maintenance
9. Disposal Most of the materials from which Hilti power tools are manufactured can be recycled. The materials must be cor- rectly separated before they can be recycled. In many countries, Hilti has already made arrangements for taking back your old power tools for recycling. - Page 12 UL listed to US and Canadian safety standards Homologué UL (conforme aux normes de sécurité américaines et canadiennes) Producto homologado según normas de seguridad americanas y canadienses Produto homologado de accordo com as normas de segurança americanas e canadianas...
- Page 13 Tel.: +423 / 234 21 11 Fax: +423 / 234 29 65 www.hilti.com Hilti = registered trademark of Hilti Corp., Schaan W 3080 0905 10-Pos. 3 Printed in China © 2005 Right of technical and programme changes reserved S. E. & O.