ACR Electronics Nauticast 2662 User Manual page 83

Sub-Menu
Fairway View Scale
Fairway View Symbols
Radar View Symbols
Other Graphical Settings
Fairway View Scale
N53°31
*********** Fairwayview Scale **********
Angle(A): 178°
Dim(B):50%
----------------------------------------
NUM| Save
Dynamic Keys: Fairway View Scale
[M5] [Save]
Parameter description:
Parameter
Angle(A)
Dim(B)
Dim(C)
Dim(D)
Y1-03-0211 Rev D
Content
Settings of the Geometry and Scale of the
Fairway View
Symbol settings of the Fairway View (also the
minimized Fairway View)
Symbol settings of the Radar View (also the
minimized Radar View)
AIS-target filter settings; enabling / disabling the Auto
Zoom feature; Alarm appearance
E10° 1 |1>0.69|2>0.77|3>1.08nm
Dim(C):100%
\ - A - / +- B -+
+ + /
\ . / /
/ \ /
| | + -
| | |
+---+ +-----/ \-----+-
| |
Save the settings
Description
The angle α defines the visible sector.
Value range: 2° to 178°
The parameter Dim(B) defines the width of the fairway in percent of
the horizontal line. Please ensure that Dim(C) has to be greater or
equal to Dim(B).
Value range: 10% to 100%
The parameter Dim(C) defines the width of the fairway in percent of
the „Zero-line" (the horizontal line of the own ship position). If you
want to choose a width greater than the visible "Zero-line" you have
to enter here 100%, additionally the parameter Dim(D) has to be set
to a value greater than zero.
Value range: 10% to 100%
The parameter Dim(D) defines the height of the horizontal guidance
lines in percent of the display resolution (pixel). If you want to
choose a width greater than the visible "Zero-line" (refer to the
horizontal guidance lines f´2) you have to enter the value 0%,
additionally the parameter Dim(C) has to be set to 100% (your
parameters will pass an internal value check while entering).
Value range: 10% to 70%
Dim(D):20%
\
\
\
- C - - +-
. |D
| Back
Return
[M8] [Back] Graphical
Display Menu
to
79