ACR Electronics Nauticast 2662 User Manual page 31

e) Confirmation of Broadcast Sent Message
This Confirmation Screen shows that the message was successfully transmitted on the
Broadcast Setting. By pressing [Back] the user automatically returns to the Message Editor
for further Messaging. The [SendTo] returns the user to the Vessel Listing, with the option of
further Message Writing to individual vessels.
N 1
----------------------------------------
++++++++++++++++++++++++++++++++++++++++
[+] OK, broadcast successful
++++++++++++++++++++++++++++++++++++++++
----------------------------------------
In the case of failed transmission, the following screen appears. In this case, it is
recommended to retransmit the Broadcast Message.
N 1
----------------------------------------
++++++++++++++++++++++++++++++++++++++++
[-] Message could not be sent
++++++++++++++++++++++++++++++++++++++++
----------------------------------------
f) Long Range Interrogation
Mobile, and shore-based stations have the ability to interrogate vessels and make requests
for information over the "Long Range Interface". The interrogated vessel can either reply in
automatic, or in manual mode. The interrogation request is displayed in both modes.
The arrival of a Long Range Interrogation Request is indicated by:
1L on the top right hand corner of the Navigation Screen. The LRI automatically arrives in
the Message Inbox LRI and can be handled from there.
Y1-03-0211 Rev D
o o
19' E 0 13' |1>0.10|2>1.30|3>1.80nm
Broadcast Transmission Status
| | Send To |
o o
19' E 0 13' |1>0.10|2>1.30|3>1.80nm
Broadcast Transmission Status
| | Send To |
| <-Back
|<-Back
27