ACR Electronics Nauticast 2662 User Manual page 28

a) Writing an Addressed Message
To write a Safety Related Message first select an addressee from the Vessel Listing. This is
possible by using the cursor buttons [Up] and [Down], and confirming the selection with
[Enter] or [Select].
LAT:N 48°12.177'IntSOG:0.0kn
LON:E 16°26.166'IntCOG:0.0°
IntDGPS:3D
BluSign: OFF
012/034..ShipName....RNG.BRG..SOG..COG..
WACHAU
OSB WIEN_____[Cl-A] 1.57 319
TWIN CITY LIN[Cl-A] 1.73 319
ADMIRAL TEGET[Cl-A] 1.80 319
VINDOBONA____[Cl-A] 1.83 319
SKORPION
DONAUPLUS
MS ORTH______[Cl-A] 3.32 299
Dynamic Keys: Messages
[M5] [Select]
[M8] [Back]
b) Using the NAUTICAST Message Editor
After selecting a vessel, the Message Editor is automatically displayed.
Messages containing a maximum of 156 characters are allowed. Longer texts require a
second message. After text input completion, transmission to the selected addressee is
facilitated by pressing the [Send] button. The [<Back] button leads to the Message Editor for
writing a second message to the same addressee. A second activation of the [<Back] button
leads to the Vessel Listing and allows selection of another addressee.
It is possible to select the desired channel by pressing the [<Channel>] buttons.
The default setting for Addressed Messages is (auto) in contrast to Broadcasted Messages,
where the default setting is set at Channels A+B (AIS1 + AIS2).
N 1
************ Write Message *************
Addressed SRM
SendTo:5004 (DOREEN)
Text:TEXT INPUT IS POSSIBLE HERE
----------------------------------------
Channel:
----------------------------------------
Y1-03-0211 Rev D
/B
[Cl-A] 1.50 320
[Cl-A] 1.84 138
[Cl-A] 2.38 320
Write Message to
Selected Vessel
Return to Messages
Menu
o o
20' E 0 13' |1>0.10|2>1.30|3>1.80nm
auto/ A / B /A+B
[*]/[ ]/[ ]/[ ]
| Send |<Channel |Channel> | Back
02/25/2008
15:08:29
Reg1 ! 3A 2T
AISMode: INLAND
208.2
0.0
0.1 298.4
0.1 220.4
0.1 214.2
0.0 224.6
0.1 232.2
0.1 237.8
0.0 313.8
Write
[Enter]
Selected Vessel
129
Message to
24