ACR Electronics Nauticast 2662 User Manual page 45

Select Submenu 3 "Persons on Board" with cursor button [Up] & [Down] or by pressing No.
2 on the keyboard.
NOTE: The total number of persons on board will be calculated automatically. In "High Seas"
mode this sum will be used for the AIS messages.
The "Persons on Board" could be transmitted via addressed or broadcast message. The
following screen appears after the selection "Broadcast PoB message" by pressing M7.
Dynamic Keys: Broadcast Message Editor
[M5] [Send]
[M6] /
[Channel]
[M7]
[M8] [Back]
NOTE: The addressed message operates equal to the addressed message (chapter 3.4)
described in section "Writing Messages".
Select Submenu 4 "Destination" with cursor button [Up] & [Down] by pressing No. 4 on the
keyboard.
Select between „use mask‟ and „input string‟.
Y1-03-0211 Rev D
o o
N 1 18' E 0 12' |1>0.01|2>1.30|3>1.80nm
************* PoB Settings *************
Crew Members:0-254 (255 = unknown = default)
Passenger :0-8190(8191= unknown = default)
S. Personal :0-254 (255 = unknown = default)
--------------------------
Total :nnnn Members
M6: Send addressed PoB Message
M7: Broadcast PoB Message
----------------------------------------
Num| Save |Addressed |Broadcast | Back
o o
N 1 19' E 0 12' |1> N/A|2>0.00|3>0.10nm
************** Send PoB ****************
Broadcast PoB Message
----------------------------------------
auto/ A / B /A+B
Channel: [*]/[ ]/[ ]/[ ]
----------------------------------------
| Send |<Channel |Channel> | Back
Send Message
Select Transmission
Channel (A+B
default)
Return to Messages
Menu
[Enter] Send Message
is
41