Transponder Configuration (User Password Protected) - ACR Electronics Nauticast 2662 User Manual

3.5.4 Transponder Configuration (User Password Protected)

The Configuration Menu allows the user to alter the hardware-based parameters. User
Password Configuration is also undertaken here.
Accessing the Configuration Settings:
The Configuration Menu is User Password protected.
NOTE: Please see Appendix 7.3 for password information.
N 1
-----| |
View | +- 2. Region Settings
-----| +- 4. Interrogation Settings
Msg. | +- 6
-----|
Displ|
----------------------------------------
NUM|Select->|
Dynamic Keys: Transponder Configuration
[M5] [Select]
Accessing the Configuration Menu (Please see Appendix 7.3 for password information)
The letters of the Password appear as
N 1
----------------------------------------
++++++++++++++++++++++++++++++++++++++++
++++++++++++++++++++++++++++++++++++++++
----------------------------------------
Dynamic Keys: Input of Default User Password to Access
[M5] [Enter]
Y1-03-0211 Rev D
o o
22' E 0 15' |1> N/A|2>0.00|3>0.10nm
|----------------------------------
| 5. Transponder Configuration
| +- 1. Change User Password
| +- 3. Alarm Settings
| +- 5. Sensor Settings
Inland AIS quality Info
|
|
|
Select desired
Submenu
*
when being input on the screen.
o o
18' E 0 12' |1>0.10|2>1.30|3>1.80nm
User password protected!
Please enter user password:
****
| Enter | |
Configuration
Confirm Default
User Password
Input
|<-Back
Return to Main
[M8] [Back]
Menu
| Exit
Return to Vessel
[M8] [Exit]
Listing
47