Service Configuration (Service Password Protected) - ACR Electronics Nauticast 2662 User Manual

3.5.5 Service Configuration (Service Password Protected)

The Service Configuration Menu allows initial configuration of the Service Password,
Password Settings (on/off), MMSI/IMO Numbers and the option of resetting the NAUTICAST
to Factory Settings.
The Service Password is required in order to enter the Service Configuration Menu. This is a
higher security level than can be reached with the User Password and therefore ensures that
the Service Configuration is protected, and limited to authorized service personnel.
NOTE: Please see Appendix 7.3 for password information. It is strongly recommended to
change the service password immediately after commencing initial NAUTICAST operation!
N 1
-----| |
View | +- 2. User Password Settings
-----| +- 4. Change DAC / ESN
Msg. | +- 6. Restore Factory Settings
-----|
Displ|
----------------------------------------
NUM| Select->|
Dynamic Keys: Service Configuration
[M5] [Select]
[M8] [Back]
After entering the Default Service Password (Please see Appendix 7.3 for password
information) in the password query, the Service Configuration Menu may be accessed. In
this menu it is possible to configure both the Service Password and the User Password
Settings, as well as input the MMSI/IMO Numbers and reset the to Factory Settings.
N 1
----------------------------------------
++++++++++++++++++++++++++++++++++++++++
++++++++++++++++++++++++++++++++++++++++
----------------------------------------
Y1-03-0211 Rev D
o o
21' E 0 14' |1>0.01|2>1.30|3>1.80nm
|----------------------------------
| 6. Service Configuration
| +- 1. Change Service Password
| +- 3. Change MMSI / IMO
| +- 5. Change AIS Mode
|
|
|
Confirm Submenu
Selection
Return to
Menu
o o
24' E 0 17' |1>0.10|2>1.30|3>1.80nm
Service password protected!
Please enter service password:
| Enter | |
|<-Back
Confirm
[Enter]
Selection
Main
| Exit
Submenu
57