ACR Electronics Nauticast 2662 User Manual page 49

Example:
Length (of the complete convoy) = 400m
Beam (of the complete convoy) = 32m
Internal GPS-Antenna is mounted 20 metres from stern and 24 metres from starboard.
Length(Conv)
Beam(Conv)
RefPtExt
RefPtInt
The full line as shown will be displayed after pressing Enter:
RefPtInt
Enter RefPtExt (location of the external GPS antenna) in the same way.
Ship length and beam have to be entered in dm. Conversion 1m is 10dm.
NOTE: The field ATIS Code will be shown as Call Sign in "High Seas" - Mode. The field
Length(ship) and Beam(Ship) are only the values of the ship and calculated in dm (1m / 10).
For stand alone ship enter same dimensions, Length(ship) and Beam(Ship) again.
Save the new settings by pressing [Save]. Press [Back] return to the Main Menu Screen
without saving any changes.
Dynamic Keys: Input of Ship Settings
[M5] [Save]
Y1-03-0211 Rev D
: 400
: 32
:
: B20D24 (no spaces, no decimals, no commas)
: A380 B20 C8 D24m (A and C are calculated by the AIS).
o o
N 1 19' E 0 12' |1>0.01|2>1.30|3>1.80nm
************ Ship Settings *************
Atis Code :max. 7ASCII
ShipName :NAUTICAST(TM) INLAND AIS
| |
Length(Conv):400m
Beam(Conv) :32m
RefPtExt :A380 B20 C8 D24m
RefPtInt :A380 B20 C8 D24m
Length(ship):600dm
Beam(ship) :220dm
----------------------------------------
| Save |
Confirm Data Input [M8]
+------+
| A
| |
| x--|
| | B
| | |
+-C-+D-+
| | Back
[Back]
Return to Main
Menu
45