ACR Electronics Nauticast 2662 User Manual page 59

e) Sensor Settings
Within this service password protected menu the NAUTICAST offers the following
configuration options:
Set up data speed 4800/9600/38400 baud.
Monitor the connected sensor inputs for each sensor channel.
Verify and edit the Sensor Configuration on the display screen.
Analyze the information received from the connected sensor devices.
Produce an electronic installation report.
Configuration of various NMEA protocols.
Dynamic Keys: Sensor Settings
[M5] [Save]
[M6] [Default]
[M7] [Analyce]
[M8] [Back]
Use this menu to set up the data speed 4800/9600/38400 baud.
NOTE: This configuration should be done only by advanced users like installation
technicians. Therefore you will find more details in the installation manual.
During the configuration process, the NAUTICAST is not operational.
Y1-03-0211 Rev D
o o
N 1 19' E 0 12' |1> N/A|2>0.00|3>0.10nm
*********** Sensor Settings ************
BaudRate Sensor1:< 4800>
Ignored:$HC---$-----$-----$-----
$-----$-----$-----$-----
1>Start Monitor>
BaudRate Sensor2: 4800
Ignored:$HC---$-----$-----$-----
$-----$-----$-----$-----
2>Start Monitor>
BaudRate Sensor3: 38400
Ignored:$HC---$-----$-----$-----
$-----$-----$-----$-----
3>Start Monitor>
----------------------------------------
| Save | Default | Analyze | Back
Save Data Input
Restor the default
settings
Analye you NMEA
Data streem
Return to Menu
Configuration
CRC: auto
CRC: auto
CRC: auto
[Up] / Select Data Field
[Down]
for Configuration
Select Data Field
[Enter]
for Configuration
[Left] /
Configure Data
[Right]
55