Appendix A. Utility Functions; Accessing Utility Mode - DigiDesign Command 8 Manual

appendix a
Utility Functions
Command|8 Utility functions include the fol-
lowing:
• Software and firmware version display
• Fader calibration
• Tests for faders, encoders, LEDs, switches,
and the LCD

Accessing Utility Mode

To access Command|8 Utility mode:
Press F1 Utility. The LCD displays the avail-
1
able Utility functions across the upper row. The
corresponding channel Select switch select each
option.
Press a channel Select switch to choose a Util-
2
ity function.
To cancel a Utility function or test at any time,
3
press Select on channel 8 (the LCD displays ESC
above channel 8), or press Utility again.
Viewing Command|8 Version Data
This Utility function lets you check the current
firmware version and other statistics useful
when upgrading, or when contacting technical
support.
To display Command|8 version data:
Access Utility mode.
1
Select Vers by pressing the corresponding
2
channel Select switch. The LCD shows version
information about various components of Com-
mand|8.
To exit, press channel eight Select (below the
3
LCD display ESC).
Appendix A: Utility Functions 55