G200 Range Optional Products And Accessories; Optional Products; Analyser Data Manager (Optional); Event Log - Geotech G200 Operating Manual

G 2 0 0 R A N G E
Operating Manual

G200 RANGE OPTIONAL PRODUCTS AND ACCESSORIES

Optional Products

The G200 analyser range has a number of optional products for purchase which enhance the usability
and enable further analysis of data and reading information.
Note: For more information on the features listed in this section please contact Sales at QED on
+44(0)333 800 0088 or email sales@qedenv.co.uk.

Analyser Data Manager (Optional)

Analyser Data Manager software application enables the operator to maximise the operation of the
analyser by providing the ability to:

Obtain instrument status.

View the instrument readings and event log data.

Download and store readings for further analysis.

Graph downloaded instrument readings.

View, import and export the instrument configuration.

Update the instrument's firmware.

Copy data from the G200 Client into other packages such as MS Excel.

Email data directly from the application.

Configure remote access to a central database.

Print graph and tabular data.

Event Log

The G200 range of instruments incorporates the facility to log significant events via the 'Event Log'.
This can be used as an aid to monitoring the use of the instrument. It can also be used as a diagnostic
tool if there is a problem with the instrument.
The event log can only be viewed via the optional Analyser Data Manager software. It cannot be
viewed on the analyser screen. Applicable events are stored in the event log automatically. No user
intervention is required.
The event log can hold approximately 270 events. If the log becomes full then it begins to overwrite
the older events. This can be identified by the index field which starts from event number 1. The log
is cleared when the instrument is reset.
Note: Please refer to section
Carbon Monoxide Reading (Optional – Enhancement for G210 ONLY)
The G210 instrument has the optional facility to use an internal CO cell (specified at the time of
manufacture or upon request at service interval). This allows the instrument to read and display
carbon monoxide readings along with N
www.geotechuk.com
Event Log of this operating manual for further information.
O.
2
OMG200N Iss.04
© QED Environmental Systems Ltd.
Page 9 of 61