Panel Key Functions - Geotech G200 Operating Manual

G 2 0 0 R A N G E
Operating Manual

Panel Key Functions

Key Description
A Main Read Screen
B Soft Keys
C On/Off Key
D Pump Key
E Scroll Left Key
F Scroll Down Key
G Menu Key
H Enter Key
I Scroll Up Key
J Scroll Right Key
L Serial Number
M Instrument Stand
www.geotechuk.com
Function
Start and end screen when using the instrument.
The function of the three 'soft-keys' on the front of the
instrument panel are determined by menu options
taken. Functions vary from screen to screen.
Press the 'On/Off' key briefly to switch the instrument
on and off.
Press the 'Pump' key to start or stop the pump.
Also 'Key 4'. Enables the operator to scroll left to
display more information.
Also 'Key 8'. Enables the operator to scroll down to
display more information.
Press the 'Menu' key to go to the 'Main' menu. Enables
the operator to pre-set values and settings. Select
options from the 'Main' menu to also view data and
readings stored or held.
The 'Enter' key accepts/confirms choices made by the
operator to various functions and operations. Also,
required to confirm numeric data entry.
Also 'Key 2'. Press scroll up to view further information
on the instrument read screen.
Also 'Key 6'. Press scroll right to view further
information on the instrument read screen.
Unique Identification for the instrument. Verification of
the serial number will be required if Technical Support
assistance is needed.
Instrument stand.
© QED Environmental Systems Ltd.
Page 14 of 61
OMG200N Iss.04