Generic Rs-232 Serial Line - Kongsberg EM 122 Installation Manual

Generic RS-232 Serial line

This cable holds a multi purpose serial line. It provides interface with any peripheral
unit. One end of the cable connects to the local unit (DTE) with a 9-pin D-connector,
while the other connects to the peripheral (DCE) as described in the peripheral unit's
documentation. Note that this cable does not support all the signals in the standard
RS-232 specification.
Local
9-pin D connector
2
RX
3
TX
5
GROUND
5
Female 9-pin
D-pin connector
9
1
Male 9-pin
D-pin connector
6
(CDC 103)
Cable specifications
• Conductors: 2 x 2 x 0.5 mm²
• Screen: Screened twisted pairs and overall braided
• Voltage: 60 V
• Maximum diameter: Limited by the plugs
317669/B
1
6
5
9
View
Drawing file
Remote system
9-pin D connector
2
RX
3
TX
5
GROUND
133