Sound Intensity Level - ProMinent DULCO Trans 40/1000 PVDF Operating Instructions Manual

Description of Motor, Sound intensity level, Safety instructions hand nozzle
 Integral no-volt release
Motors with the integral no-volt release function are secured
against accidental start-up following
interruption of the operating voltage (see rating plate U<)
Motors with the no-volt release function cannot be remote-
controlled.
The motor can only be restarted by pressing the on/off button.

Sound intensity level

The sound intensity level of this pump is = 75 dB (A)

(measured on the manufacturer's pump test stand)
Safety instructions Hand nozzle
 Transfer clean and uncharged liquids only.
 Do not exceed maximum operating pressure of 2 bar at 60°C.
 When filling into a container, make sure that no excess
pressure will be built up - danger of liquid splashing.
 Do not transfer liquid at high speed to avoid splashing
of liquids.
 Comply with all relevant safety instructions.
Wear appropriate protective clothing.
(face shield, protective gloves, etc.)
 Ensure that the hose is securely fixed to the hosetail.
 Do not mechanically overstress swivel joint. Hand nozzle
is not appropriate for pulling the flexible hose.
To avoid mechanical stress on the hand nozzle,
slightly bend the flexible hose only.
 The hand nozzle may not be used for liquids which are
not compatible with its materials of construction (nozzle housing,
nozzle valve, seal, hose ...). Also confer to resistance chart.
 Never leave the hand nozlzle unattended, because
it does not close automatically.
15
.