Table 12 - Available Holding Registers - ETC Sasquatch User Manual

Register
3:2501 – 3: 2506 Total Production Save Time
3:2507
3:2508
3:2509
Holding Registers

Table 12 - Available Holding Registers

Register
4:0001
4:0002 – 4:0007
4:0008
4:0009 – 4:0010
4:0011 – 4:0030
Description
Total Production Log
Total Production Log Plunger Arrival Count
Total Production Log Maximum recorded
Velocity
Total Production Log Minimum recorded
Velocity
Description
General Controller Settings
Modbus Write Time
The amount of time to wait after the last
written value before saving all changes to
the controller.
Controller Date/Time
Daylight Savings Time configuration
Day Start Time – Start of the gas day.
Reserved
Read
Date / Time Format
0 - 65535
0 – 1000 m/min (0 – 3281 ft/min)
0 – 1000 m/min (0 – 3281 ft/min)
Read/Write
0 – 65535 seconds.
Writing zero (which is the default)
will save all changes as they are
made.
Date/Time
0 = Disabled
1 = Enabled
Elapsed Time format: 0 – 86340
(00:00: – 23:59)
When in HH:MM:SS format, only
Hours and Minutes are available.
N/A
26