Advertisement
1A
1
1C
FIGURE 1
STEP 1:
• LOOSELY assemble the CROSS SUPPORT (3) to the lower tube on the TOWER (1) using four RH CAPS (33), two 3/8 X 3-3/
4" BOLTS (12), four 3/8" SAE WASHERS (15), four 3/8" RH WASHERS (16) and two 3/8" LOW HEIGHT LOCK NUTS (14)
as shown in FIGURE 1.
• LOOSELY assemble the CROSS SUPPORT (3) to the upper tube on the TOWER (1) using four RH CAPS (33), two 3/8 X 2-3/
4" BOLTS (10), four 3/8" SAE WASHERS (15), four 3/8" RH WASHERS (16) and two 3/8" LOW HEIGHT LOCK NUTS (14)
as shown in FIGURE 1.
1/2
0
10 3/8 X 2-3/4"
33
12 3/8 X 3-3/4"
1/2
1
2
3
3B
16
15
1/2
1/2
3
4
1/2
4
5
14
1/2
6
Advertisement
