Connections - Danfoss VLT OneGearDrive Instruction Manual

Motor Datasheet

8.6.2.4 Connections

Figure 8.16 shows the cage clamp and the connection to VLT
V1 W1
U1
U V W
U V W
Figure 8.16 Cage Clamp and Connection to VLT
Description Coding Pin Color Typical cross-
Brake supply B1 1 Brown AWG 20/
B2 2 Black
Table 8.4 Mechanical Brake Option Connections
NOTICE!
Connect terminal 05 on the VLT
The connection and use of the mechanical brake has been tested and released with VLT
®
VLT Decentral Drive FCD 302. Any other adjustable frequency drive may require a different connection. Contact Danfoss
Service for further information.
For information about parameter setting and programming when using VLT
Drive FCD 302, refer to the corresponding instruction manual.
MG75C422
Instruction Manual
~ ~
PE T1 T2 B1 B2
1 2
®
AutomationDrive FC 302.
Maximum cross-
section section
AWG 14/
0.75 mm 2 2.5 mm 2
®
AutomationDrive FC 302 to the 400 V AC supply.
Danfoss A/S © 08/2014 All rights reserved.
®
AutomationDrive FC 302.
®
VLT AutomationDrive FC 302
400 V AC supply
Terminal 04
®
®
AutomationDrive FC 302 or VLT
® External
VLT
DC supply
Decentral Drive
FCD 302
Terminal 122 +
(MBR+)
Terminal 123 –
(MBR–)
AutomationDrive FC 302 and
®
Decentral
8 8
31