RETAINER SETTING 56100RBTA
Set retainer 27X according to drawing.
Set looper with washer 21210 (1 mm)/ 21210A (0,5 mm) or
21210C (0,3 mm) so high that the distance between the looper
(A, pict.) and the retainer is 0.1 - 0.2 mm at its' narrowest (pay
attention to free flow of lower feed dog).
EINSTELLEN DES SCHLINGENRÜCK-
HALTERS 56100RBTA
Schlingenrückhalter 27X nach Skizze einstellen.
Greifer mit Unterlagscheibe 21210 (1mm )/ 21210A (0,5) mm
oder 21210C ( 0,3 mm) so hoch einstellen, dass der Abstand
zwischen Greifer (A, Bild) und dem Schlingenrückhalter (B,
Bild) an seiner engsten Stelle 0,1 - 0,2 mm beträgt (beachte
Freigängigkeit zum Untertransporteur).
15