Configuring Connection Between A Dhcp Global Address Pool And A Bims Server2-12 - H3C S3600 Series Operation Manual

Operation Manual – DHCP
H3C S3600 Series Ethernet Switches-Release 1510
You can configure gateway addresses for address pools on a DHCP server. Currently,
you can configure up to eight gateway addresses for a DHCP address pool.
Table 2-9 Configure gateway addresses for DHCP clients
Operation
Enter system view
Create a DHCP
address pool and
enter
address pool view
Configure gateway
addresses
DHCP clients
2.2.9 Configuring Connection Between a DHCP Global Address Pool and a
BIMS Server
Branch intelligent management system (BIMS) is a kind of network management
software, provided by H3C Technologies Co., Ltd. With BIMS you can manage and
monitor network devices that dynamically obtain IP addresses universally and
effectively.
After configuring the connection between the DHCP global address pool and the BIMS
server, you can enable the BIMS server to manage the devices that have obtained IP
addresses from the global address pool.
Table 2-10 Configure connection between a DHCP global address pool and a BIMS
server
Enter system view
Create a DHCP address
pool and enter DHCP
address pool view
Configure the connection
between the DHCP global
address
BIMS server
system-view
dhcp
DHCP pool-name
gateway-list
for
ip-address&<1-8>
Operation
system-view
dhcp
pool-name
bims-server ip ip-address
[
pool and the
sharekey key
Chapter 2 DHCP Server Configuration
Command
server ip-pool
Command
server ip-pool
port port-number
2-12
Description
—
Required
By default, no global DHCP
address pool is created.
Required
By default, no
address is configured.
Description
—
Required
By default, no DHCP
global address pool is
created.
Required
By default,
connection
]
the DHCP
address pool and the
BIMS server
configured.
gateway
no
between
global
is