H3C S3600 Series Operation Manual page 34

Operation Manual – DHCP
H3C S3600 Series Ethernet Switches-Release 1510
II. Configuring the option 184 supporting function in interface view
Table 2-25 Configure the option 184 supporting function in interface view
Enter system view
Enter interface view
Configure an IP address
for the interface
Configure the interface to
operate in DHCP server
mode and assign the IP
addresses
interface-based address
pool to DHCP clients
Configure the NCP-IP
sub-option
Configure
sub-option
Configure
VLAN
sub-option
Configure the Fail-over
call routing sub-option
Note:
Perform the operations listed in Table 2-25 in interface view if you specify to assign
IP addresses of an interface-based address pool to DHCP clients.
This method allows you to configure the option 184 supporting function for a specific
interface.
Operation
system-view
interface
interface-number
ip address ip-address net-mask
dhcp select interface
of an
dhcp server voice-config ncp-ip
ip-address
the AS-IP
dhcp server voice-config as-ip
ip-address
the voice dhcp
configuration voice-vlan
disable }
dhcp server voice-config fail-over
ip-address dialer-string
Chapter 2 DHCP Server Configuration
Command
interface-type
server voice-config
vlan-id {
2-27
Description
—
—
—
Required
Required
Optional
enable | Optional
Optional