Configuration Example - H3C S3600 Series Operation Manual

Operation Manual – DHCP
H3C S3600 Series Ethernet Switches-Release 1510
III. Configuring the option 184 supporting function in global DHCP address
pool view
Table 2-26 Configure the option 184 supporting function in global DHCP address pool
view
Enter system view
Configure the interface to
operate in DHCP server
mode and assign the IP
addresses of a global
address pool to DHCP
clients
Enter DHCP address pool
view
Configure an IP address
range IP addresses in
which
assigned
Configure
sub-option
Configure
sub-option
Configure the voice VLAN
configuration sub-option
Configure the Fail-over
call routing sub-option
Note:
Perform the operations listed in Table 2-26 in global address pool view if you specify to
assign IP addresses of a global DHCP address pool to DHCP clients.

2.6.4 Configuration Example

I. Network requirements
A 3COM VCX device operating as a DHCP client requests the DHCP server for all
sub-options of option 184. A H3C series switch operates as the DHCP server. The
option 184 supporting function is configured for a global DHCP address pool. The
sub-options of option 184 are as follows:
NCP-IP: 3.3.3.3
Operation
system-view
dhcp select global { all | interface
interface-type interface-number [ to
interface-type interface-number ] }
dhcp server ip-pool pool-name
network ip-address [ mask netmask ]
are dynamically
the NCP-IP
voice-config ncp-ip ip-address
the AS-IP
voice-config as-ip ip-address
voice-config
{ enable | disable }
voice-config
dialer-string
Chapter 2 DHCP Server Configuration
Command
voice-vlan
fail-over
2-28
Description
—
Required
—
—
Required
Optional
vlan-id
Optional
ip-address
Optional