H3C S3600 Series Operation Manual page 41

Operation Manual – DHCP
H3C S3600 Series Ethernet Switches-Release 1510
on the network, with the conflicting IP address as the destination and an enough
timeout time.
The IP address is manually configured on a host if you receive a response packet
of the ping operation. You can then disable the IP address from being dynamically
assigned by using the dhcp server forbidden-ip command on the DHCP server.
Attach the DHCP client to the network, release the dynamically assigned IP
address and obtain an IP address again. For example, enter DOS by executing
the cmd command in Windows XP, and then release the IP address by executing
the ipconfig/release command. Then obtain an IP address again by executing
the ipconfig/renew command.
Chapter 2 DHCP Server Configuration
2-34