H3C S3600 Series Operation Manual page 33

Operation Manual – DHCP
H3C S3600 Series Ethernet Switches-Release 1510
I. Configuring the option 184 supporting function in system view
Table 2-24 Configure the option 184 supporting function in system view
Operation
Enter system view
Configure the interface
to operate in DHCP
server
assign
addresses
specified
interface-based
address pool to DHCP
clients
Configure the NCP-IP
sub-option
Configure the AS-IP
sub-option
Configure the voice
VLAN
sub-option
Configure the Fail-over
call routing sub-option
Note:
Perform the operations listed in Table 2-24 in system view if you specify to assign IP
addresses of an interface-based address pool to DHCP clients.
This method allows you to configure the option 184 supporting function for multiple
interfaces.
system-view
mode and
the IP dhcp select interface { all | interface
of a interface-type
interface-type interface-number ] }
dhcp
ip-address { all | interface interface-type
interface-number
interface-number ] }
dhcp
ip-address { all | interface interface-type
interface-number
interface-number ] }
dhcp server voice-config voice-vlan
vlan-id { enable | disable } { all |
configuration
interface interface-type interface-number
[ to interface-type interface-number ] }
dhcp
ip-address dialer-string { all | interface
interface-type
interface-type interface-number ] }
Chapter 2 DHCP Server Configuration
Command
interface-number
server voice-config
[ to interface-type
server voice-config
[ to interface-type
server voice-config
interface-number
2-26
Description
—
[ to Required
ncp-ip
Required
as-ip
Optional
fail-over
[ to