Installation; Initial Inspection; Storage And Shipment - Keysight Technologies 8481A Operating And Service Manual

1 Introduction

Installation

Initial Inspection

Inspect the shipping container. If the container or packing material is damaged, it
should be kept until the contents of the shipment have been checked
mechanically and electrically. If there is mechanical damage or if the instrument
does not pass the performance tests, notify the nearest Keysight Technologies
office. Keep the damaged shipping materials (if any) for inspection by the carrier
and an Keysight Technologies representative.
Original Packaging
Containers and materials identical to those used in factory packaging are
available through Keysight Technologies' offices. If the instrument is being
returned to Keysight Technologies for servicing, attach a tag indicating the type of
service required, return address, model number, and serial number. Also, mark the
container FRAGILE to assure careful handling. In any correspondence, refer to the
instrument by model number and serial number.
Interconnections
Refer to the power meter's User's Guide for interconnecting instructions.

Storage and Shipment

Environment
The instrument should be stored in a clean, dry environment. The following
limitations apply to both storage and shipment:
Temperature
Relative humidity
Altitude
34
o
- 40 to +75 C
<95%
< 7,600 metres (25,000 ft.)
Keysight 8480 Series Operating and Service Manual