Dimensions
The physical dimensions of the power sensors differ in the model types. This is
due to the additional attenuation used to obtain the high power performance.
Table 1-1
8480 Series power sensor dimensions (including the RF connector)
8480 series power
Dimensions
sensor models
8481A, 8482A and 8483A:
38 mm wide, 30 mm high, 105 mm long (1.5 in. x 1.2 in. x 4.1 in)
A-models
8485A and 8487A:
38 mm wide, 30 mm high, 95 mm long (1.5 in. x 1.25 in. x 3.75 in.)
B-models
83 mm x 114 mm x 248 mm (approx. 3.25 in. x 4.50 in. x 9.75 in.)
8481D and 8485D:
38 mm wide, 30 mm high, 102 mm long (1.5 in. x 1.2 in. x 4.02 in)
D-models
8487D:
38 mm wide, 30 mm high, 94 mm long (1.5 in. x 1.2 in. x 3.7 in)
H-models
38 mm wide, 30 mm high, 149 mm long (1.5 in. x 1.2 in. x 5.9 in)
Do not disassemble the power sensor. The 8480 series power sensors are
CAUTION
static sensitive and can be easily damaged.
8480 series, B-models information
The 25 W (+44 dBm) power sensor is a calibrated combination of a 30 dB, 25 W
attenuator assembly and a sensor assembly. The attenuator and sensor
assemblies are calibrated as a set and must be used together if specified
accuracies are to be obtained.
This combination is referred to as the power sensor.
Keysight 8480 Series Operating and Service Manual
Introduction
1
17